- 电压击穿试验仪
- 介电常数
-
电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:高温绝缘电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:石墨电极电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:210-炭块电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:121T-高温电阻率测试...
-
落球回弹试验仪,介电击穿强度测定仪:多功能极片电阻测量系统
-
落球回弹试验仪,介电击穿强度测定仪:121A-绝缘电阻率测试...
-
点对点对地电组率测试仪
-
油介质损耗电阻率测试仪
-
121A1-热刺激电流测...
-
121B-全自动电阻率测...
-
高低温绝缘电阻率测量系统
-
落球回弹试验仪,介电击穿强度测定仪:121-体积表面电阻率测...
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
- 粉末电阻率测试仪
- 落球回弹试验仪,介电击穿强度测定仪:导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫材料检测仪器
-
泡沫起升仪
-
新-泡沫分析仪
-
海绵泡沫切割机
-
织物透气率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵压缩变形试验箱
-
落球回弹试验仪,介电击穿强度测定仪:海绵压缩变形试验机
-
海绵落球回弹试验仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵压陷硬度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵压缩蠕变测试仪
-
海绵空气透气率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵往复冲击疲劳试验机
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫缓冲能量试验机
-
2000-海绵拉伸撕裂试...
-
1000-海绵拉伸撕裂试...
-
落球回弹试验仪,介电击穿强度测定仪:慢回弹泡沫复原时间测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-慢回弹泡沫复原时间测...
-
泡沫起升仪
- 落球回弹试验仪,介电击穿强度测定仪:受电弓/碳滑板检测仪器
- 材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
落球回弹试验仪,介电击穿强度测定仪:多功能压力测量系统
-
粉末自然堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:粉体综合物性测试仪
-
氧化铝流动角测定仪
-
塑料表观密度测试仪
-
普通磨料堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:白土堆积密度测定仪
-
氧化铝流动时间测定仪
-
压实密度粉末电阻率仪
-
陶粒砂体积密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:氧化铝松装密度测定仪
-
表面活性剂表观密度仪
-
落球回弹试验仪,介电击穿强度测定仪:自由流动堆积密度测定仪
-
超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高直流电压小电压电流实验仪(耐电弧焊接实验仪)-(确定机掌控)
High voltage low current tester (arc resistance tester) - (computer control)
新产产品名号:耐电弧试验机
Product name: electric arc resistance tester
成品规格:NDH-A
Product model: NDH - A
做到规则:GB/T 1411-2002《气体绝缘性资料耐高偏低功率电弧焊接尖端放电的试验检测》(同等IEC 61621-1997)及ASTM D495等规则的特殊要求设计方案制作业的,并不符合IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
其主要用于区间及作用:
本耐压试验仪是按APP于三相异步电机、电子元件和家居电量子元件等市场的电焊工用氟氟塑料、环氧树脂胶胶和隔绝漆等隔绝资料的耐电孤使用稳定性评审,主用在液态隔绝资料如:氟氟塑料、聚酯薄膜、环氧树脂胶、黑云母、瓷器、夹层玻璃、隔绝油、隔绝漆、瓦楞纸等物质的耐电孤使用稳定性测式;
本现场进行测试机由医学掌控加载,应该体现当下工作进行测试环境及进行测试的时间,进行测试完成后并存放当下工作进行测试统计资料,并可网页打印.标淮实验性该报告。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 该设备为两边分立式空间结构,下面为作业整体,上侧为实验箱。
2 本的产品主要包括*新自动化把控技術,根据选定编译程序(IEC或ASTM)可主动来进行实验设计,并在电脑主机上现示经过多次实验发现的过程 和最终结果。
3 **耐热性很好,抗侵扰力量强,检查的精密度就越高。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 弧光通断精力偏差:需小于 ±10ms
2 调压器存储量:2kVA
3 载荷系数实验室检测电压值:12.5kV
4 试验检测电压电流表面粗糙度:±3%
5 电流量把控好导致精度:±10% 电流大小检测的精确:1.5%
6 参比电极对制样压:(0.5±0.05)N
7 电极片产品:钨棒
8 参比电极多远:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 选用学习环境温差:(23±2)℃
10 适用工作环境温度湿度:(50±5)%
11 开关电源:220V±5% 50Hz
12 耐压 的方法: 行业标准/美标/10 mA 连继/20 mA 连续不断/30 mA间断/40 mA连着
13 试验检测源程序如下所述:
| 软件段 | 脉冲电压 mA | 电孤通断时候s | 各应用程序段坚持时长s | 测试总准确时间s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 接连通 | 60 | 240 | |
| 5 | 20 | 接连通 | 60 | 300 | |
| 6 | 30 | 累计通 | 60 | 360 | |
| 7 | 40 | 连续式通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 序号顺序 | 名稱 | 的数量 | 微信备注 |
| 01 | 耐脉冲软件综合测试仪 | 这台 | |
| 02 | 探针体系 | 一项 | |
| 03 | 金属电极支承 | 整套 | |
| 04 | 24v电源电缆线 | 一种 | |
| 05 | 跨接放** | 1支 | |
| 06 | 交流电毫安表 | 几台 | |
| 07 | 电脑上测控软文 | 一种 | |
| 08 | 试板架 | 一套 | |
| 09 | 电极材料间隔条件块 | 2块 | |
| 10 | 的视角规定块 | 2块 | |
| 11 | 淘瓷片 | 2片 | |
| 12 | 喷墨彩打机 | 1台 | 项目 |
| 13 | 折算机 | 1台 | 品牌标志 |
| 14 | 选用描述书 | 1份 | |
| 15 | 通过证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 设备尺寸:
NDH-A 耐焊弧现场实验仪-微机操控
NDH-B 耐脉冲检测仪-手触屏掌控
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!